For 2012-2016 Scion FR-S
For 2012-2021 Subaru BRZ
For 2017-2021 Toyota 86
Fits vehicles running with FA20 Engine only
**NO instructions included. modification might required for complete installation.
**Professional TURBO Mechanic is Recommend. 
Includes - T3/T4 Turbocharger
Includes - Equal Length Turbo Manifold
Includes - Front Mount Intercooler
Includes - Intercooler Mounting Kit
Includes - Piping Kit
Includes - Silicone Coupler
Includes - T-Bolt Clamp
Includes - Air Intake Filter
Includes - Blow off Valve
Includes - Stainless Turbo Exhaust Pipe
Includes - Manual Boost Controller
Includes - Boost Gauge
**Excluding - Oil Line kit
GT28 Turbocharger
100% Brand New GT28 Turbocharger! High Quality Guaranteed! Cast housing with durable steel. Capable of boosting horse power up To 350+ BHP, standard 4 bolt exhaust T2 Flange. CNC machined flanges. Internal wastegate setting: 8 PSI. High quality .64 Turbine Turbine, .60 Compressor with a forged turbine propeller wheel!
Turbine Specs:
Trim: 76
A/R: 0.64
Inducer Diameter: 53.8mm
Exducer Diameter: 47mm
Compressor Spec:
Trim: 48
A/R: 0.60
Inducer Diameter: 49.2mm
Exducer Diameter: 71 mm
Bearing Type: Wet Float
Cooling Type: Water + Oil
Wastegate: Internal Wastegate
Oil Restrictor Size: inside diameter 2mm
Oil Feed Size: 12mm
Oil Inlet: M12*1.25
Oil Drain Size: 14mm
Oil Outlet: M14 & 2*M8*1.25
Oil Drain Thread Pitch: 40mm
Water Thread Size: M18*1.5
Horse Power: Boost Horse Power up to 350BHP
Turbo Manifold
1. Inlet Pipe Inner Diameter:1.54 in.
2. Pipe Thickness:16 gauge (1.5mm)
3. Made of High Quality T304 Stainless Steel Material
4. Top Mount Design, Comes with T2 Turbo Flange inlet
5. Equal Length for Best Exhaust Air Flow
6. Flex Pipe Insertion
7. CNC Machine Flange for MAX Strength and Durability
8. Bolt On for FA20 engine
9. Finish: Polished
Intercooler
1. Made by high quality T-6061 Billet Aluminum Construction for light Weight and Durability.
2. CNC machined, TIG Welding
3. 100% Aluminum For The Best Heat Transfer
4. Burst Tested To 140psi
5. Allow More Horsepower at the Same Boost Level and Even More Power at the Higher Boost Level
6. Reducing Engine Inlet Temperature
7. CNC Machine Flange for MAX Strength and Durability
8. Core size: 15.25"x11"x2.75", Inlet / outlet: 2.25", end to end length: 20.5"
Aluminum Piping
1. Made of High quality T-6061 LIGHTWEIGHT Aluminum Piping.
2. Powder-Coated Surface Finish.
3. Increase 65% Air Flow comparing with other Standard Piping.
4. One side is 70mm(for connect Throttle Body), the other side is 50mm(for connect Turbo）in the install diagram 
Blow Off Valve
1. Aggressive JDM racing discharge sound.
2. High-Quality Diaphragm and Short Stroke Significantly Increase Response
3. Dual Spring System Promoted Response and Allows for High Boost Pressures
4. Hard-Anodized Valve for Increased Air Flow
5. 50Mm Flange Diameter; Holds Up to 35PSI Boost Pressure
6. CNC Machined Billet Aluminum Body
Boost Controller
1. Allows to adjust PSI ratings without changing the wastegate springs as well as replacing the wastegate springs.
2. High Performance Manual Boost Control From 0~30 psi Capacity.
3. CNC Machined Light Weight and Resistant to Rust.
4. Hose clamp and all necessary hardware for complete installation.
5. 1-30 PSI Adjustable.
Silicone Coupler
1. Made of high quality silicone material
2. Thickness of wall:5 mm, 4 ply reinforced
3. Working Pressure: 0.3 Mpa (43.5 PSI) to 0.9 Mpa (130.5 PSI)
4. Bursting Pressure: 2 Mpa
5. Working Temperature: -76°F (-60°C ) to +500°F (+260°C)
6. Size tolerance:+/-0.5 mm
T-Bolt Clamp
1. Made of High quality 301 SS Stainless Steel Clamp
2. Stainless steel construction resists corrosion
3. Provide uniform sealing pressure for a positive
4. Polished finish increases engine bay aesthetics
Air Filter
1. Oil-free filter Micro cotton gauze type filter material washable with water or soap and reusable.
2. Improves Up to 95% Filtration Efficiency.
3. Designed to increase horsepower and acceleration.
4. Stands Roughly Around: 6" Inlet: 3.0" Overall Tall: 3.5" Mesh Tall: 2.5"
Attention:
1. For emissions related items please check with your local jurisdiction for emission specific requirements before purchasing. NO installation instruction included unless otherwise specified. If item is questionable please consult your local professional/mechanic before making purchase.
2. Professional Turbo install is highly recommended, any damage during installation will not be refunded.
Your valid phone number is very necessary for the shipping, otherwise we can't guarantee that the package would safely arrive.
3. Don't hesitate to contact us if item stuck, unknown or fault installation !!
4. Oil Line kit is not included.